locking blockの例文

• This cross pin is known as the locking block pin and is located above the trigger pin.
• These models operated on the short recoil, delayed locking block system, which yielded a faster cycle time.
• The falling locking block design provides good accuracy and operability with suppressors due to the in-line travel of the barrel.
• The frame houses the locking block, which is an investment casting that engages a 45?camming surface on the barrel's lower camming lug.
• The design allows a low bore axis relative to the shooter's hand and avoids the use of the transfer / locking block typically found in rotating barrel pistols.
• A ramped lug extension at the base of the barrel then interacts with a tapered locking block integrated into the frame, forcing the barrel down and unlocking it from the slide.
• As such, there is no transfer block ( locking block ) " per se ", and the barrel extension directly interfaces with the frame via the replaceable cross-pin.
• The locking system features a locking block hinged from the bolt and housed in the bolt carrier that contains two locking lugs which descend into and engage locking shoulders in the cartridge casing from the chamber.
• With the exception of the slide, frame, barrel, locking block, recoil spring, guide rod, and slide lock spring, all of the other components are interchangeable between the models 17 and 19.
• The Ultrastar, also known as Model 205, uses the same operating method as the Model M31, but with an ejector port locking block, the Ultrastar pistols are smaller and lighter guns for carry and concealment.
• As the assembly of bolt, barrel and barrel extension recoiled to the rear of the gun upon firing, the locking block was drawn out of engagement by a cam in the bottom of the gun's receiver.
• A locking block integrated into the frame then engages a lug at the base of the chamber and drives the barrel downward, separating it from the slide and terminating any further rearward movement while the slide continues back in a straight line.
• In 1998, the frame was further modified with an accessory rail ( called the " Universal Glock rail " ) to allow the mounting of loaded chamber indicator, and the locking block was enlarged, along with the addition of an extra cross pin to aid the distribution of forces exerted by the locking block.
• In 1998, the frame was further modified with an accessory rail ( called the " Universal Glock rail " ) to allow the mounting of loaded chamber indicator, and the locking block was enlarged, along with the addition of an extra cross pin to aid the distribution of forces exerted by the locking block.
• The APX design is a major departure from the M9 . The M9 uses a P38-style locked breech short recoil system, but this has not been carried over to the APX . The APX, instead, uses the system pioneered on the SIG Sauer P220; instead of a tilting locking block, as in the M9, the breech is now locked by the breech block being cammed into engagement with the slide, in the same manner as was first seen on the SIG Sauer P220.